Wheel Loader Solid Tyre 23.5-25

Produktbeschreibung

Loader tires are designed to bear heavy loads in different working conditions. They are made for rough terrain and heavy-duty use. These tires are put on vehicles that are used in areas such as building infrastructure, public works, mining, construction, scrap yards, etc. Most of the loader tires are used on vehicles that have to carry heavy loads on a job site or over some distance across rough terrain. The tires can last for years without too much wear and tear if used and maintained properly.

Loader tires type

There are three types of loader tires: Bias-Ply, Belted Bias, and Radial. Each of the three has its own set of features and specifications. Moreover, each is suited for particular types of working conditions.

Bias-Ply Tires: Bias-Ply tires have a cross-ply construction that is made of heavy rubber. The construction of the plies is done in a crisscross pattern from one side of the tire to the next. The tread is placed upon this pattern. The ply construction allows the tire to flex more and provide a smoother ride.

Belted Bias Tires: These involve the same construction as the bias-ply tires, but the steel belts are placed below the crisscross patterns. The steel belts are placed at different angles so that the overall performance of the tire improves. It is highly effective at higher speeds and reduces rolling resistance.

Radial Tires: Radial tires are made with heavy steel cords and involve a more complex construction process. The bead goes across the tread at a right angle to the tread's centerline. The cords are placed parallel to one another. It also has stabilizer belts that are placed below the treads. It improves the tire strength and increases the life of the tire. The disadvantage of this tire is the ride is not as smooth as the other two types of loader tires.

Choosing the right loader tires can be the difference behind heavy equipment under performance or operational excellence. Using the correct type of tires will save your business time and money in the long run. Business owners and/or loader operators should keep their working environment, haulage cycle, etc. in mind when choosing tires. Since it is always a compromise between ride quality and toughness, focus on which factor is more important for the specific type of work for which the tire is being purchased.

Handhabung und Lagerung

Handling: Precisely defined methods must be used when handling tires. Failure to use these methods may cause irreparable damage to tires and may even be dangerous. The bead is a sensitive part of the tire, and if it is damaged during handling operations, this may lead to premature scrapping of the tire. To limit the risks: tires should preferably be handled using the appropriate equipment for this type of work: forklift truck, mechanical loader or crane equipped with a tire handler or textile straps; lift the tire by the tread.

storage: The rubber used for tires is subject to natural aging. To prevent storage shortening the lifetime of tires, they must be stored under specific conditions and for a limited length of time. Moisture, high temperatures (also significant variations in temperature) and light are all factors that speed up the aging of the rubber. These are increased in areas with high levels of sunlight and/or exposed to frequent storms (presence of ozone).Inner tubes must be stored in their original packaging so that they are not exposed to light. - Flaps must be stored flat on shelves, protected from dust, moisture and grease-based pollution. - O-rings, when supplied with the tires (in sealed plastic bags), must be removed from the tires during storage. Store them away from the light. Protect them from any risk of being crushed or distorted, which could damage the airtightness of the tire when mounting on the rim.

Verpackung & Lieferung.

Before packaging, we generally evaluate the fragility of the goods and the value of the goods, and then select the appropriate inner packaging materials. Secondly, we consider that various situations may occur during transportation, and we have requirements for the compression, shock and water resistance of the outer packaging of the goods.
About the shipping method, Cabin usually use sea shipping methods, and the port can be specified by the customers.

Certifications

Unternehmensprofil

Shandong Tianfu International Trade Co., Ltd. was founded in 2001,We are engaged in chinese brand wheel loader spare parts wholesale and export business,We have own brand spare parts ,2,000 square meters of warehouse can ensure enough inventory,Products are exported to Europe, the Middle East, Central Asia, South Asia and other countries. Spare parts of each system including:Power system,Torque Converter and Transmission system,Power train, Hydraulic system,Brake system,Sheet metal system,Cab and accessorie,Conditioner system,Electrical system,Oil product, etc. Wheel Loader Multi-function Auxiliaries : Wood grabber, pipe grabber, cotton grabber, grass grabber, sweeper, marble fork, snow shovel, snow thrower, ditch opener, etc. In addition, we are also engaged in parts of engine. High quality products,enough stock,19 years export experience,we can offer professional service and competitive prices for you . Shandong Tianfu looking forward to cooperation with you !

FAQ

1. Wer sind wir?
We are based in Shandong, China, start from 2019,sell to Africa(20.00%),Mid East(20.00%),Northern Europe(20.00%),Southeast Asia(10.00%),Eastern Asia(10.00%),Western Europe(10.00%),South Asia(10.00%). There are total about 11-50 people in our office.

2. Wie können wir Qualität garantieren?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.Was kannst du bei uns kaufen?
Loader parts,Engine parts,loader torque converter,loader transmission,Torque converter transmission assembly

4. Warum sollten Sie von uns nicht von anderen Lieferanten kaufen?
Shandong Tianfu International Trade Co., Ltd was engaged in chinese brand wheel loader and engine spare parts wholesale and export business. High quality products,enough stock,rich export experience,we can offer professional service and competitive price.

5. Welche Dienste können wir bieten?
Accepted Delivery Terms: FOB,CFR,CIF,EXW；
Accepted Payment Currency:null;
Accepted Payment Type: null;
Language Spoken:null